How To Change Your Own BMW Oil And Save Big Money

One problem BMW car owners face is when it comes to oil changes. Especially for the new model BMW vehicles. The resort is always spending a lot of money to change your car oil, which shouldn’t always be that way.

Do your own BMW oil changes, saving a lot of money. You’ll easily change your oil with a few simple tools, the right oil and filters, and a willingness to endure the process.

Determining Your BMW Oil Weight

Most modern BMW cars take 5w-20 full synthetic oil; make sure you know your BMW’s oil type before you start. There are several places to look to find your BMW oil weight. The oil cap under the hood is the easiest place to look, and the owner’s manual is also there to guide you.

Using the correct weight oil in your BMW oil change is important, as your engine is engineered with a specific oil weight. If it’s too heavy, the oil may not be able to reach all the engine parts that need lubrication. If it’s too thin, your engine oil won’t properly coat internal parts, causing harmful friction and wear.

Finding The Right Filter

It can be a bit challenging to get the right oil filter. Different manufacturers and brands use different part numbers, making it hard to find an easy answer. However, there are online stores like FCPEuro where you can buy oil and filter at once.

You’ll start by selecting the BMW model you own, and oil change packages for that specific model will be shown to you. Although BMW’s modern models are not rampant in Nigeria, finding this online store where you can easily get what you’re looking for reassures you that your vehicle is getting the right thing.

Why You Can’t Afford To Drive Your BMW Too The Dealership For Oil Change All The Time

BMW has a branch in Nigeria but not across all states in Nigeria. So imagine if your vehicle suddenly needs an oil change and you’re not in a city like Lagos or Abuja. What, then, do you do? 

For most owners of luxury BMW cars in Nigeria, the resort is flying BMW reps down to your location. But that’s a lot of additional costs. But learning to do this oil change yourself makes all the difference.

What You Need To Change Your Oil

First, you’ll need to get your BMW off the ground. A jack and jack stands are the most reliable choice, but ramps can also work. Just make sure you have the ground clearance you’ll need first.

You’ll also need a good socket set and oil filter wrench. The socket set should be metric and have a 1/2 -inch drive. This ensures that the ratchet will also fit your filter wrench. You’ll also need a bowl or pan to pour the old oil.

• 5 Quick Steps On How To Clean Your Car Air Filter, when to Replace any Car Air Filter
• How To Know When You Need To Change Your Car
• Motorists and commuters lament over the deplorable state of the Lagos-Abeokuta Expressway
• How To Get Foreign Driving License From Nigeria, Cost and how to obtain a foreign drivers’ license
• Avoid These Mistakes When Doing Any Car Maintenance Yourself

Conclusion

It might seem like a lot of work at the initial stage. But, over time, you get used to doing it, and it also reduces costs for you.